CONTACT : + 91 - 98252 23750
 
HOME ABOUT PRODUCTS PRODUCTION QUALITY MARKETS DOWNLOAD CONTACT US
 
 
Production
  Manufacturing Process    
  Novelness of Products    
  Laser Printing Machine    
         
         
         
         
         
         
         
         
         
 
Production - Manufacturing Process
     
  The temper proof seals are generally made up of Polycarbonate plastic materials (Engineering plastic) and having stainless steel twisted wire (two stained) molded itself in the temper proof seal male and female part.

To manufacture the temper proof seal first of all we have to pre heat the Polycarbonate plastic materials at 110 degree C in drier for three to four hours before using. And mean time Stainless steel wire is tested first in dimension and acid test and then it is twisted in twisting machine up to desired twist and then it is cut by cutter to required length.

First we put pre heated Polycarbonate plastic materials granule in Vertical type molding machine and then mould of seal is been closed by hydraulic pressure of machine and then wire is insertin mould and then material is been injected in mould through moulds machine and hence temper proof seal is got ready.

The emboss type numbering arrangement on male and side of female part of the temper proof seal is itself in the mould and the constructive numbering is obtain in all The temper proof seals by automatic arrangement of numerator counter inserted in mould itself.

Then these temper proof seals are tested by pullout test, Acidic test and then we shall supply as per client requirements and i.e. arranging in serially, tide with the steel wire forming a loop and the same shall be packed in polythene bag with labels furnishing sr. nos. of seal, packed in corrugated box.
 
     
     
QUICK RESPONSE
 
   

   

   

   
 
 
 
CONTACT DETAILS
     
 
TWITTER
   
 
 
FACEBOOK
   
 
             
 
 
     
                 
Powered By : Technosoft